Wheel Hubs for Trailer
Goforbrakes carries a list of wheel hubs made for trailers,with international American standards,bearings,bolts,grease seals are pre-installed,covering trailer axles capacity from 2000 lb to 10000 lb,the above hub is black E coat finished,check the following available coating ways,you can get almost all coatings commonly seen from your market.
Following table shows all the parts numbers or specs,we accept any custom designs from you,please check:
|3||Surface:||Black Painted / Hot Dip Galvanized / E-coating / Dacromet|
|5||PCD:||4×4″, 4×4.5″, 4×4.75″, 5×4.5″, 5×4.75″, 5×5″, 5×5.5″, 6×5.5″, 8×6.5″|
|6||Stud Pattern:||Ford,HT Holden,HQ Holden,Commodore,Datsun,Mini,Land Cruiser|
Our hubs are widely used on:
Caravan/RVs,and other possible trailers
Dacromet is the leading inorganic coating specified by automotive companies worldwide and is a proven coating system in many industries. A water-based, VOC compliant coating, Dacromet has excellent corrosion resistance in the salt spray test and Heat resistance,for example:the salt water testing time could be over 500 hours.This is an environment-friendly process. DACROMET® is applied using conventional Dip-Spin, Spray or Dip-Drain-Spin equipment following an alkaline and/or mechanical cleaning cycle. Coating thickness can be varied by altering elements in the application processes. to find more,please check this link from Michiganmetalcoatings
Hot-dip galvanizing, In short,it is the process of dipping items into a bath containing molten zinc with the temperature of around around 4600C, The process is inherently simple which provides a distinct advantage over other corrosion protection methods.When exposed to the atmosphere,zinc reacts with Oxygen to form a tightly-bonded coating that provide superior corrosion protection to metel.galvanized parts are widely used in applications where corrosion resistance is needed(like boat trailer parts for salt water anti-corrosion) with the cost is much less than stainless steel.
Customers today need higher quality and durability for the products they buy. Not only they expect these products to perform well, but also they want the finish to look good and resist corrosion for a much longer period of time,then E-coating (another name for electro-coating)is a good choice,E coating offers the best value of protection for over the road use(like Caravan) and for fresh water marine(or limited salt water) applications. E-coating is a method of painting,Parts are dipped into a vat of the lacquer or paint and are electrified in order to promote a reaction at the surface which deposits the paint. The process works on the principal of “Opposites Attract”.